Request for Calibration of Techincal and Scietific Equipment (SWQIS)

9 pc Volumetric Pipette

1mL, 2mL, 3mL, 5mL, 10mL, 15mL, 20mL, 25mL, 50mL

8 pc Volumetric Flalsk

10mL, 25mL, 50mL, 100mL, 200mL, 250mL, 500mL, 1000mL

1 pc Graduated Cylinder

2 pc Dispenser 5 mL (Sibata)

3 pc Dispenser 10 mL (Sibata)

1 pc Dispenser 10mL (Onilab)

7 pc Calibration of test weights 1g, 2g, 5g, 10g, 50g, 100g, 200g

1 pc Drying Oven (Thermo Scientific), Test for Temperature of 60°C, 75° and 110°C)

1 Unit Analytical Balance (Ohaus)

- Test for: * eccentricity test and Repeatability Test

0.5g, 1g, 2g, 5g, 10g

1 unit Top Loading Balance (Mettler Toledo)

- Test for: * eccentricity test and Repeatability Test

1g, 10g, 50g, 100g, 200g

1 unit Top Loading Balance (Shimadzu)

- Test for: * eccentricity test and Repeatability Test

1g, 10g, 50g, 100g, 200g

1 unit pH/EC meter (Apera)

- Test Point for pH 4,7 and 10

3 pc Thermohygrometer, calibrate temperatute and humidity reader

1 pc Dry Delumidifier Cabinet (Instruchem) calibration @ 30% Humidity

pc Request for Calibration of Techincal and Scietific Equipment (SPMS)

2 pc Toploading Balance (want) - Test for: eccentricity test and Repeatability Test 1g, 10g, 50g, 100g and 200g

1 pc Hydrometer

3 pc Drying Oven (menmert) - Test for Temperature of 60°C, 75° and 110°C

6 pc Graduated Cylinder, 1000ml

8 pc Calibration of test weights 1g, 2g, 5g, 10g, 50g, 100g, 200g

1 Unit Thermohygrometer (ISOLAB), Calibrate Temperature and Humidity Reader

2 Unit Mechanical Stirrer (UTS)

Request for Calibration of Technical and Scientific Equipment (SBRMS)

2 pc Analytical Balance (Aczet and Precisa) 9220g Capacity0, conduct eccentricity test, repeatability test, weighing test, 0.1, 0.25g, 0.5g, 1g, 5g, 10g, 20g, 100g, 200g

1 pc Toploading Balance (Shimadzu) (4200g capacity), conduct eccentricity test, repeatability test, weighing test and shift test, 1g, 10g, 20g, 50g, 100g, 1000g, 4000g

1 pc Toploading Balance (Shimadzu) (6200g capacity), conduct eccentricity test, repeatability test, weighing test and shift test, 1g, 10g, 20g, 50g, 100g, 1000g, 4000g

2 pc Autoclave (Bio and ALP), calibrate temperature and pressure controller, temp control display, test point 100°C 15 psi

5 pc Biological Refrigerator (Sanyo, Sibata, Bio, Fujiidenzo), calibrate temperature controller, temp control display, test point 4°C

1 pc Chest Freezer (Fujidenzo), calibrate temperature controller, temp control display, test point-20°C

2 pc Climate Incubator (Bio and Nuve), calibrate temperature controller, temp control display, test point 20°C, 25°C, 30°C, 45°C

2 pc Drying Oven (Memmert and Zhicheng), calibrate temperature controller, temp control display, test point 50°C, 60°C, 75°Cm 195°C, 121°C

1 pc Microwave (Samsung), calibrate temperature controller, temp control display

6 pc Automatic Pipettor (100-1000 microliters) Accumax, Dlab and Witeg, calibrate accuracy of volume dispensed

2 pc Automatic Pippettor (2-10ml) DragonLab and Scilogex, calibrate accuracy

2 pc Dispenser (5-50ml) Vilab and Kartell, Calibrate Accuracy of volume dispensed

1 pc Dispenser (1-10ml) Kartell, Calibrate Accuracy of volume dispensed

1 pc Dispenser (10-100ml) Kartell, Calibrate Accuracy of volume dispensed

2 pc Thermohygrometer (Acez and Metrolm), calibrate temperature and humidity reader

1 pc pH Meter (Horiba), calibrate with 4, 7 and 10 buffers

1 pc Water Bath (JSR), calibrate temperature controller; temp control display, 40°C, 45°C, 50°C

2 pc Graduated Cylinder (Pyrex), 100mL

1 pc Graduated Cylinder (Pyrex), 500mL

2 pc Graduated Cylinder (Pyrex) 1000mL

4 pc Test Weight, 500g, 200g, 50g, 2g

Prevententive Maintenance and Verification of Technical and Scientific Equipment (SWQIS)

1 unit Dry Cabinet (Instruchem)

verification @ 30% Humidity

2 unit Fumehood (Lab Conco), PMS & Verification

3 Unit Centrifuge (Kukusan), PMS & Verification

1 unit Kjeldahl Nitrogen Distillation Unit (Buchi) verification of time (3-4 minutes) to dispense 75mL of distilate

1 unit Mehcanical Shaker (Daika)

3 unit Drying Oven (Thermo Scientific), PMS check temperature control display, and verification

1 unit Top Loading Balance (Shimadzu)

- Test for: * eccentricity test and Repeatability Test 1g, 10g, 50g, 100g and 200g

1 unit Analytical Balance (Ohaus), verification @ 0.5g, 1, 5 and 10g

1 Unit Top Loading Balance (Mettler Toledo) verification 1g, 10g, 50g, 100g, 200g

1 Unit pH/EC meter (Hinotek)

verification @ pH 4, 7 and 10

Preventive Maintance of Technical and Scientific Equipment (SPMS)

2 pc Top loading Balance (want) clean, check parts and operational status

3 pc Drying Oven (memmert) clean, check temperature control display; check operational status

2 pc Aggregate Analyzer (daiki) clea, check parts, apply oil and grease and check operational status

Preventive Maintance of Technical and Scientific Equipment (SBRMS))

2 pc Analytical Balance (Aczer and Precisa) (220g capacity) (220g capacity), clean and check parts and operational status

1 pc Top Loading Balance (Shimadzu) (4200g capacity), clean and check parts and operational status

2 pc Autoclave (Bio and ALP), clean check temperature and pressure control display, check drain, check operational status, temperature verification @ 121°C

5 pc Biological Refrigerator (Sanyo, Sibata, Bio, Fujiidenzo), clean, check temperature control display, check operational status, temperature verification @≤ 4°C

1 pc Chest Freezer (Fujidenzo), clean, check temperature control display, check operational status, temperature verification @ ≤ -20°C

2 pc Climate Incubator (Bio and Nuve) clean, check temperature control display; check operational status, temperature verification 25°C, 30°C, 35°C, 60°C, 65°C

SWRRD-OAP R & D

2 pc Biosafety Cabinet Class II (Cyste and Bio), inspection, check filter integrity (air velocity and particle count), check operational status

1 pc Plant Tissue Grinder (Foss), check operational status

2 pc Drying Oven (Memmer and Zhicheng), clear, check temperature control display, check operational status temperature verification @ 65°C 70°C, 105°C, 120°C

1 pc Microwave (Samsung), clean, check temperature control display, check operational status

1 pc pH Meter (Horiba), check electrode, check operational status, verification@ pH 4, 7 and 10

1 pc Water Bath (JSR), check temperature control display, check operational status, temperature verification @ 5°C, 45°C, 99°C

2 pc Drying Oven (Memmert and Zhicheng), clean, check temperature control display, check operational status temperature verification @ 65°C, 70°C, 105°C, 120°C

1 pc Top Loading Balance (Shimadzu) 6200g capacity), clear and check parts and operational status

TOTAL

Supplier should be ISO/IEC 17025 Accredited

Awarding is per lot basis

Delivery of services is required

within June 1-30, 2021

***************

Enduser: SWRRD

Deadline for submission of bids: May 17, 2021 at 12:00pm

Please attach/submit the following documents with your quotation: copy of (1) PHILGEPS registration number or certificate; (2) mayor's permit, (3) Updated Ommibus Sworn Statement for ABC above Php 50K; (4) Latest Income/Business tax return for ABC above 500K; (5) PCAB License for Infrastructure Project; and (6) Curriculum Vitae and/or Professional License for Consulting Services.

The Bureau of Soils and Water Management (BSWM) invites interested parties to bid/quote for the above listed item/s.

Kindly submit your quotation for the purchase of the above requirement, (indicating our Solicitation Number) address to GINA P. NILO, Ph.D., BAC Chairperson.

The drop box for your Bids/Quotations is located at the BSWM Lobby.

The BSWM reserves the right to reject any or all bids to declare the bidding a failure or waive any or all information or to award such bids to the supplier whose bid is considered most advantageous to the government.